Home/Company/Quality & certifications
Standards · testing · documentation

What we hold,
and what we do not.

Most suppliers list certifications and stop. Buyers in regulated markets need the other column too — the standards we are not certified to, the markets we cannot serve. A missing certificate is a commercial fact; a substituted one is a liability that lands on your plant, not ours.

2STANDARDS WE HELPED DRAFT
24 moRETAINED SAMPLES
6SITES WITH LABS
100%BATCHES WITH COA
01 — Certifications

The documents
we can actually produce.

✓

GB 15892 — drafting unit

Group entity named as a drafting unit of the drinking-water PAC standard, as Henan Huaquan Tap Water Materials General Factory.

✓

GB/T 22627 — drafting unit

Named as a drafting unit of the industrial PAC standard, as Henan Huaquan Water Treatment Co., Ltd.

✓

Hygiene licence

Held for potable-water contact materials. Copy supplied with any drinking-water grade quotation.

✓

ISO 9001 / 14001

Quality and environmental management systems certified across the production sites.

✓

SGS / CCIC

Third-party inspection arranged per shipment at the buyer's request and cost.

✓

GB/T 17514 · GB/T 31246

Anionic and non-ionic PAM to GB/T 17514-2017; cationic PAM to GB/T 31246.

✕

No NSF/ANSI 60

Not held. US municipal drinking-water plants requiring it should not buy our PAC 29%, and we will decline the enquiry rather than substitute a document.

✕

No EU REACH registration

As a manufacturer outside the EU we do not hold REACH registration ourselves. EU importers must register or use an only-representative.

On the two columns. The right-hand column is not modesty, it is information. If your specification names a certification we do not hold, the cheapest outcome for both of us is to establish that before the sample is couriered.

02 — Batch testing

Every batch,
four gates.

A COA is only meaningful if it comes from a sample that could not have been swapped. Ours is drawn at packing, sealed, and kept for 24 months.

GATE 1Raw materialAluminium hydroxide, calcium aluminate, acrylamide monomer, initiators. Certificate and identity check on receipt.every lot
GATE 2In processBasicity, degree of hydrolysis, viscosity and pH during reaction — the parameters that cannot be corrected later.every reactor
GATE 3Finished batchFull specification panel including heavy metals by ICP-MS. Released only on the COA, not on the operator's judgement.every batch
GATE 4Retained sampleSealed sample held 24 months, so a dispute is settled against the batch as shipped.24 months
03 — Laboratory

What is tested,
and how often.

The panel below is the routine schedule. Anything marked per batch appears on the COA that travels with the shipment.

ParameterMethodFrequency
Al₂O₃ contentEDTA titration (GB/T 22627, GB 15892)Every batch
BasicityTitrationEvery batch
pH (1% solution)Glass electrodeEvery batch
Insoluble matterGravimetric filtrationEvery batch
Heavy metals (As, Pb, Cd, Hg, Cr⁶⁺)ICP-MS, spectrophotometryEvery batch
Molecular weight (PAM)Intrinsic viscosityEvery batch
Degree of hydrolysis / charge densityTitration / colloid titrationEvery batch
Residual acrylamide monomerHPLCEvery batch
Dissolution timeStandard make-down testEvery batch
Particle size distributionSieve analysisPer production run
Methods follow the national standards named on each product page. A parameter not on this list can usually be added to the routine schedule for contract volumes — tell us which one matters to your process.
04 — Documents

What ships
with the container.

With every shipment
Batch COAFull panel, batch number, production date
SDSGHS-format safety data sheet, English
Packing listBags, pallets, net and gross weight
Certificate of originOn request, including Form A / FTA where applicable
On request
TDSTechnical data sheet for the specific grade
Hygiene licence copyFor PAC 29% and potable-duty grades
Third-party reportSGS, CCIC or BV, arranged per shipment
Jar-test protocolOne-page method your operators can follow
05 — Questions

From procurement and QA.

Can I see a COA before ordering?

Yes — ask for a sample COA from the grade you are considering, and we will send a recent batch. If you need a specific parameter that is not on our standard panel, tell us and we will add it to the routine test schedule for your orders.

Do you accept third-party inspection?

Yes. SGS, CCIC, Bureau Veritas or your own surveyor can inspect at loading, at your cost. We will provide the loading plan and access to the batch records. Inspection is normally arranged by the buyer, but we can introduce our local contacts.

What happens if a batch fails our incoming test?

We compare your result against the retained sample from the same batch. If the batch is out of specification we replace it or credit it — decided on the retained sample, not on a conversation. That is why we keep a sealed sample of every batch for 24 months.

Do you hold NSF/ANSI 60 or EU food-contact certification?

No. We hold a Chinese hygiene licence for potable-water contact and produce to GB 15892. We do not hold NSF/ANSI 60, and as a manufacturer outside the EU we do not hold EU REACH registration ourselves. If your specification requires either, say so early — we will tell you whether we can meet it.

How long do you keep batch records?

Twenty-four months for the retained sample and the COA, matching the shelf life of the product. After that the records are archived and retrievable on request for a further two years.

Next step

Need a document
before you can decide?

Tell us the product and the market, and we will send the COA, TDS, SDS and licence copy that apply — plus an honest answer if one of them does not exist.

Reply within 12 working hours · data used for quotation only

Talk to us