The same two chemicals,
six different problems.
A tailings thickener, a sugar clarifier and a belt press all use PAC and PAM — but the grade, the dose and the dosing point are different in each. These pages give the water profile, the train, the dose and the failure modes for each industry, so the first conversation is about your plant rather than about our catalogue.
Pick the one
you are standing in.
Mining
Tailings thickening, coal washing, acid leach CCD and concentrate filtration.
20–80 g/t PAM
View application →Oil & gas
EOR polymer flooding, produced water, drilling fluids and oily sludge.
1,000–2,500 mg/L
View application →Municipal water
Drinking water coagulation, sewage treatment and sludge dewatering.
10–80 g/m³
View application →Pulp & paper
Retention and drainage, white water clarification, deinking sludge.
0.2–1.0 kg/t
View application →Textile
Dyeing and printing effluent decolourisation, COD reduction, dye sludge.
80–400 g/m³
View application →Food & sugar
Cane and beet juice clarification, process water, food plant effluent.
5–20 g/t cane
View application →Every train has
the same three steps.
Whatever the industry, the logic is identical: destabilise, bridge, separate. What changes is the chemistry of the solids and the equipment that does the separating.
Tell us the industry and the constraint.
We will send the right page and the right grade.
Tell us the flow rate, suspended solids, pH and what the plant is currently failing on. You get a product recommendation, a dose range and a sample dispatch date — from an engineer, not a sales sheet.
